Loading 3D rig…
3× High Output 100W · crossarm 55″ · 108.5 lb hung
Bill of Materials
Steel 12.5 lb · Fixtures 96 lb · Fixtures list $12,869.73
- Drop 12" set on a cantilever frame — bracketed arms mount flush to the steel, so no rod is added and the drop is cosmetic. To actually suspend the crossarm below the beam, pick the Trapeze (rod-hung) frame.
- Layout: 3× at 18" OC = 36" outer-to-outer; strut cut to 55.3" (4" end bearing each side).
- DEP gen3: 1× for 3 fixture(s) — 1.1 A connected at 277 VAC vs 12.8 A continuous/DEP (16 A max, 80% derate). Assumes one daisy-chained run; confirm run length ≤ 175 ft (up to 400 ft for gen3 + Powercore-gen2) with the CK Configuration Calculator.
Fixtures
| 423-000123-03 | ReachElite High Output Powercore 100W RGBW — 20° native, 32 lb | 3 ea | 96 lb |
Fixture mounting
| N225 (HDG) | 1/2" cone nut (spring channel nut) — yoke foot into strut slot, 2/fixture | 6 ea | 0.6 lb |
| HHCS-1/2x1-1/4 (HDG) | 1/2"-13 × 1-1/4" hex cap screw — through yoke foot into N225 | 6 ea | 0.5 lb |
| FW-1/2 (HDG) | 1/2" flat washer — under screw head at yoke foot | 6 ea | 0.1 lb |
B-LINE strut frame
| B24 (HDG) | 1-5/8" × 1-5/8" 14 ga — standard channel, light gauge — primary member, cut to 55.3" | 4.61 ft | 6.7 lb |
| B118 | Gusseted shelf bracket — cantilever support | 2 ea | 1.8 lb |
| B351L-1/2 (HDG) | Steel C-clamp with locknut — rated 380 lb, flange 0 – 3/4 | 2 ea | 2.8 lb |
| N225 | 1/2" channel nut with spring | 8 ea | 0.6 lb |
| HHCS-12-78 | 1/2-13 × 7/8" hex head cap screw | 8 ea | 0.6 lb |
| BX-22 | End cap, 1-5/8 channel | 2 ea | 0.04 lb |
Required system parts
| 108-000055-00 | Leader cable, 50 ft, UL — one per fixture | 3 ea | |
| 106-000004-04 | Data Enabler Pro gen3, 100-277VAC, UL — power/data supply | 1 ea |